Fire Doors

The purpose of a fire door is to help protect those who use the building whether it be commercial premises or a residential building. Fire doors are part of a building’s passive fire protection system, an essential requirement for all public buildings, offices and factories.

FSE Fire Safety Systems have a great deal of experience installing and repairing fire doors with our highly trained and skilled engineers. We are also able to conduct monthly fire door checks under current fire legislation: The Regulatory Reform (Fire Safety) Order 2005.

Quite often a building’s fire door performance will be compromised by either damage, over painting or just general wear and tear. The removal of locks or changes to the door furniture can often compromise its integrity; in a fire situation the door will not hold back a fire or the spread of smoke. This means that the lives of occupants within the building will be at risk as adequate protection is not in place.

Fire doors are also a requirement in certain domestic situations, such as:

• in flats or HMOs
• where a door leads into an integral garage, or
• in any dwelling where there is a second floor ‘habitable’ room, such as houses with loft conversions or a ‘room in the roof’.

All rooms in any of these situations are separated from other rooms, or compartmented, in order to:

• keep any fire in the compartment in which it starts
• protect the occupants (and contents) of other compartments
• provide a safe, protected route to allow the occupants to escape.

The walls, ceilings, entrances and exits are therefore designed to resist the fire for a specified period of time.

FSE are able to carry out a site survey in order to provide a competitive quotation for fire safety door works. Our trained engineers will be able to advise the best course of action and the most cost-effective way to ensure your premises is compliant and employees are kept safe.

The fire door, unlike any other door, must then perform its prime purpose – to protect lives and offer protection to the remainder of the building and to other buildings.

Intumescent Strips

In the event of a fire, the intumescent strips ensure a door retains fire resisting properties and holds back the blaze while occupants safely escape. FSE can provide a full range of intumescent strips from 10mm to 15mm with a range of colours including brown and white. Quite often intumescent strips are inadvertently painted over, compromising the integrity of the door allowing smoke to easily spread in a fire situation. When existing doors are not fitted with intumescent strips but do have 25mm door stops the requirement is only for smoke seals to be fitted.

Our engineers are specially trained to ensure all fire and smoke seals are installed correctly in line with current legislation, ensuring maximum site safety for building occupants.

Fire Door Self-Closing Device

FSE successfully fit fire door closers to all types of fire doors. Our qualified engineers can provide a range of closers from our budget range through to branded self-closers such as Briton. Automatic door release mechanisms are also available, letting you keep doors open in your premises increasing accessibility while remaining compliant.

Fire Rated Hinges

Fire doors should have automatic closing devices (fire door closers) fitted. Because of the weight of a fire door and to prevent it warping, fire doors are usually fitted with three fire door hinges. The current BS EN standard does, however, allow two hinges in certain circumstances. All hinges that FSE provide come with a guarantee and are installed correctly to ensure that the performance of the fire door is maintained.

Why Choose Us

Our Competent People

Our Industry Experience

Our Tailored Service

Our Total Solution

Our National Coverage

Our Innovative Approach

Our Commitment to Compliance

Our World Class Customer Service

Our Certification